Honda 2008 Ridgeline Owner's Manual page 265

Main Menu
Replacing a Rear License Plate
Bulb
1. Remove the license plate light
assembly by pulling it towards you,
and then pulling the front edge
upward.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Table Of Contents
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
4. Push the socket into the light
assembly, and turn it clockwise
until it locks.
2008 Ridgeline
5. Turn on the lights to make sure
the new bulb is working.
6. Reinstall the light assembly in the
bumper.
Lights
261