GMC 2010 Sierra 1500 Crew Cab Owner's Manual page 353

3. Say the first digit to be stored. The system will
repeat back the digit it heard followed by a tone.
Continue entering digits until the number to be
stored is complete.
If an unwanted number is recognized by the
system, say Clear at any time to clear the last
number.
To hear all of the numbers recognized by the
system, say Verify at any time and the system
will repeat them.
4. After the complete number has been entered, say
Store . The system responds with Please say the
name tag followed by a tone.
5. Say a name tag for the phone number. The name
tag is recorded and the system responds with
About to store <name tag>. Does that
sound OK? .
If the name tag does not sound correct, say
No and repeat Step 5.
If the name tag sounds correct, say Yes and
the name tag is stored. After the number is
stored the system returns to the main menu.
The directory command lists all of the name tags stored
by the system. To use the directory command:
1. Press and hold
responds with Ready followed by a tone.
2. Say Directory . The system responds with
Directory and then plays back all of the stored
name tags. When the list is complete, the system
returns to the main menu.
The system uses the following commands to delete
name tags:
Delete
Delete all name tags
for two seconds. The system
4-129