License Plate Lamp; Replacement Bulbs - GMC 2010 Savana 1500 Cargo Owner's Manual

Table of Contents

Advertisement

11. Slide the taillamp slightly downward to reengage
the lower clip.
12. Push the taillamp straight forward to reengage
the studs.
13. Reinstall the two inboard nuts from the inside of the
taillamp assembly.

License Plate Lamp

To replace one of these bulbs:
A. Bulb Socket
B. License Plate Bulb Assembly
C. Screws
1. Remove the two screws (C) securing the license
plate bulb assembly (B).
2. Turn the bulb socket (A) counterclockwise and pull
the bulb straight out of the socket.
3. Install the new bulb.
4. Reverse steps 1 and 2 to reinstall the license plate
bulb assembly.

Replacement Bulbs

Exterior Lamp
Back-up, Rear Parking,
Stoplamp, and Turn Signal Lamp
Center High Mounted Stop
Lamp (CHMSL)
Front Parking and Turn
Signal Lamp
Front Sidemarker Lamp
License Plate Lamp
Headlamps
Composite High-Beam
Headlamp
Composite Low-Beam
Headlamp
Sealed Beam Headlamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
3157
912
3157KX
194
194
9005
9006GS
H6054
6-53

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 savanaSavana 2010

Table of Contents