GMC 2006 Sierra 1500 Pickup Owner's Manual page 303

Problem
In auxiliary mode, the
picture moves or scrolls.
The language in the
audio or on the screen
is wrong.
The remote control does
not work.
Recommended Action
Check the auxiliary input
connections at both
devices.
Change the Video Format
to PAL or NTSC. See
"Stereo RCA Jacks"
previously for how to
change the video format.
Check the audio or
language selection in
the main DVD menu.
Check to make sure there
is no obstruction between
the remote control and the
transmitter window.
Check the batteries
to make sure they are
not dead or installed
incorrectly.
The parental control button
might have been turned
on. The power indicator
light will flash.
Problem
After stopping the player,
I push Play but sometimes
the DVD starts where I left
off and sometimes at the
beginning.
The auxiliary source is
running but there is no
picture or sound.
My disc is stuck in the
player. The Load/Eject
button does not work.
Recommended Action
If the stop button was
pressed one time, the DVD
player will resume playing
where the DVD was
stopped. If the stop button
was pressed two times the
DVD player will begin to
play from the beginning of
the DVD.
Check that the DVD player
is in the auxiliary source
mode.
Check the auxiliary input
connections at both
devices.
Turn the DVD power off,
then on, then press the
load/eject button on the
DVD player.
Do not attempt to forcibly
remove the disc from the
DVD player. This could
permanently damage the
disc and DVD player.
3-125