GMC 2006 Sierra 1500 Pickup Owner's Manual page 178

Easy Exit Seat
The controls for this memory function are located on the
driver's door.
B
(Easy Exit Seat): This button is used to program
and recall the desired driver's seat position when exiting
or entering the vehicle. The seat position can be saved
for up to two drivers.
To store the seat exit position, do the following:
1. If you have an automatic transmission, place the
vehicle in PARK (P).
If you have a manual transmission, set the
parking brake.
2. Press and release the 1 or 2 button. The seat will
move to the stored memory position.
3. Adjust the seat to the desired exit position.
4. Press and hold the exit button of the memory control
for three seconds. A double chime will sound to let
you know that the position has been stored for the
selected button 1 or 2.
To repeat the procedure for a second driver, follow the
preceding steps, but press the other numbered memory
control button.
2-84
To use the seat exit position, do one of the following:
•
If you have an automatic transmission, press and
release the exit button on the memory control while
the vehicle is in PARK (P).
•
If you have a manual transmission, press and
release the exit button on the memory control while
the parking brake is set.
•
If this feature is activated in the Driver Information
Center (DIC), removing the key from the ignition will
move the seat to the exit position.
See "Easy Exit Seat" under DIC Vehicle Customization
on page 3-64 for more information on activating this
feature in the DIC.