Taillamps, Turn Signal, Stoplamps And Back-Up Lamps; Center High-Mounted Stoplamp (Chmsl) - GMC 2006 Canyon Owner's Manual

Table of Contents

Advertisement

Center High-Mounted Stoplamp
(CHMSL)
To replace the CHMSL bulb, do the following:
1. Remove the two screws and lift off the lamp
assembly.
2. Turn the bulb socket counterclockwise and remove
it from the housing.
3. Pull the bulb straight out of the socket.
4. Insert the new bulb into the socket and press it in
until tight.
5. Insert the bulb socket into the housing and turn
until tight.
6. Reinstall the lamp assembly and tighten the screws.
Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
A. Stoplamp/Taillamp
B. Turn Signal/Taillamp
C. Back-up Lamp
5-51

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2006 Canyon and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents