Planar VM Series User Manual page 46

OSD H Position

Adjust the horizontal position of the OSD menu. Press
level.

Range: 0~100

Default: 50
OSD V Position

Adjust the vertical position of the OSD menu. Press

Range: 0~100

Default: 50
OSD Transparency

Adjust the transparency of the OSD menu. Press

Options: Off, 1~4

Default: Off
Information OSD

Apply to all pop-ups and menus that are not the main OSD (for example, mute status,
volume, and timing information). Press

Options: Off, 1~60 seconds

Default: 10
Monitor ID

Set the ID to use with both the IR remote control in ID mode and RS232 serial
commands. See page 32 for more information. Press
level.

Options: 1~255

Default: 1
Heat Status

Read the internal temperature of the display.
Planar VM Series User Manual
020-1357-01D
 
or
 
or to select the desired level.
 
or to select the desired level.
 
or to select the desired level.
 
or to select the desired
Operating the Display
to select the desired
Page | 46