Mounting The Projector - BenQ MX808ST User Manual

Table of Contents

Advertisement

MW809ST/MW826ST
• The screen aspect ratio is 16:10 and the projected picture is in a 16:10 aspect ratio
Diagonal
Inch
mm
60
1524
70
1778
80
2032
90
2286
100
2540
110
2794
120
3048
For example, if you are using a 120-inch screen, the recommended projection distance is 1262 mm.
If your measured projection distance is 1000 mm, the closest match in the
column is 1052 mm. Looking across this row shows that a 100'' (about 2.5 m) screen is required.
All measurements are approximate and may vary from the actual sizes.
BenQ recommends that if you intend to permanently install the projector, you should physically test the projection
size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this
projector's optical characteristics. This will help you determine the exact mounting position so that it best suits your
installation location.

Mounting the projector

If you intend to mount your projector, we strongly recommend that you use a proper fitting BenQ
projector mounting kit and that you ensure it is securely and safely installed.
If you use a non-BenQ brand projector mounting kit, there is a safety risk that the projector may fall
down due to an improper attachment through the use of the wrong gauge or length screws.
Before mounting the projector
• Purchase a BenQ projector mounting kit from the place you purchased your BenQ projector.
• BenQ recommends that you also purchase a separate Kensington lock compatible security cable and
attach it securely to both the Kensington lock slot on the projector and the base of the mounting
bracket. This will perform the secondary role of restraining the projector should its attachment to the
mounting bracket become loose.
• Ask your dealer to install the projector for you. Installing the projector on your own may cause it to
fall and result in injury.
• Take necessary procedures to prevent the projector from falling off such as during an earthquake.
• The warranty doesn't cover any product damage caused by mounting the projector with a non-BenQ
brand projector mounting kit.
14
Positioning your projector
16:10 Screen diagonal
H
W
Screen size
H (mm)
808
942
1077
1212
1346
1481
1615
Screen
Center of lens
Projection distance
Distance from screen
W (mm)
1292
1508
1723
1939
2154
2369
2585
Highest Lens
(mm)
position (mm)
631
736
841
947
1052
1157
1262
"Distance from screen (mm)"
Lowest/
40
47
54
61
67
74
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx825stMw809stMw826st

Table of Contents