IKEA MATMASSIG Manual page 14

Hide thumbs Also See for MATMASSIG:
Table of Contents

Advertisement

ENGLISH
slowly, the time counts down. Set the power
setting.
If the power setting is set and the time set
has elapsed, an acoustic signal sounds, 00
flashes, and cooking zone deactivates. If
cooking zone is not in use and the time set
has elapsed an acoustic signal sounds and
00 flashes.
Touch
to deactivate the function for the
selected cooking zone and the indicator for
this cooking zone flashes faster. Touch
and the remaining time counts backwards to
00. The indicator of the cooking zone goes
out.
Pause
The function sets all cooking zones that
operate to the lowest power setting
When the function operates, you cannot
change the power setting. The function does
not stop the Timer function.
• To activate this function touch
symbol
comes on.
• To deactivate this function touch
power setting that you set before comes
on.
Lock / Cleaning mode
You can lock the control panel and keep the
cooking zones operating. It prevents an
accidental change of the power setting.
Use the function to clean the
surface of the hob during the
cooking session, if needed.
First set the power setting.
To start the function touch
comes on for 4 seconds. The Timer stays
on.
To stop the function touch
setting that you set before comes on.
When you switch off the appliance, you also
stop this function.
.
. The
. The
. The symbol
. The power
Child Lock
This function prevents an accidental
operation of the appliance.
To activate the function:
• Switch on the appliance with
set the power settings.
• Touch
for 4 seconds. The symbol
comes on.
• Switch off the appliance with
To deactivate the function:
• Switch on the appliance with
set the power settings. Touch
seconds. The symbol
• Switch off the appliance with
To override the function for only one cooking
time:
• Switch on the appliance with
symbol
comes on.
• Touch
for 4 seconds. Set the power
setting in 10 seconds. You can operate the
appliance.
• When you switch off the appliance with
, the function operates again.
OffSound Control (Deactivation and
activation of the sounds)
Originally the sounds of the appliance are
activated.
Activating and deactivating the sounds:
1. Switch off the appliance.
2. Touch
for 3 seconds. The display
comes on and goes out.
3. Touch
for 3 seconds.
on.
4. Touch
of the Timer to choose one of
the following:
- the sound is off.
- the sound is on.
To confirm your selection wait until the
appliance switches off automatically.
14
. Do not
.
. Do not
for 4
comes on.
.
. The
or
comes

Advertisement

Table of Contents
loading

This manual is also suitable for:

104.672.67Matmässig 104.672.67

Table of Contents