Advertisement
CHAPTER 2
2.15 Wake-Up on LAN Connector: JWOL
The JWOL connector is for use with LAN add-on cards that supports Wake
Up on LAN function. To use this function, you need to set the "Wake-Up
on LAN" to enable at the BIOS Power Management Setup.
1
3
JWOL
Note: LAN wake-up signal is active "high".
Note:
To be able to use this function, you need a power supply that
provide enough power for this feature. (Power supply with 750ma
5V Stand-by)
PIN
1
2
3
2-19
HARDWARE INSTALLATION
SIGNAL
5VSB
GND
MP_WAKEUP
Advertisement
