MSI MS-6135 User Manual page 19

2.4-1 Power Switch
Connect to a 2-pin push button switch. This switch had the same feature
with JRMS1.
2.4-2 Reset Switch
Reset switch is used to reboot the system rather than turning the power ON/
OFF. Avoid rebooting while the HDD LED is lit. You can connect the Reset
switch from the system case to this pin.
2.4-3 Keylock
Keylock allows you to disable the keyboard for security purposes. You can
connect the keylock to this pin.
2.4-4 Power LED
The Power LED is always lit while the system power is on. You can connect
the Power LED from the system case to this pin.
Green Color:
Orange Color:
2.4-5 Speaker
Speaker from the system case is connected to this pin.
If on-board speaker is available:
Short pin 14-15:
Open pin 14-15:
2.4-6 HDD LED
HDD LED shows the activity of a hard disk drive. Avoid turning the power
off while the HDD led is lit. You can connect the HDD LED from the system
case to this pin.
Indicate the system is in full on mode.
Indicate the system is in suspend mode.
On-board speaker Enabled.
On-board speaker Disabled.
2-14