Chevrolet 2007 Cobalt Owner's Manual page 59

3. Push and pull the child restraint in different
directions to be sure it is secure.
If the position you are
using has a fixed or
adjustable head restraint
and you are using a
dual tether, route
the tether around the
head restraint.
Securing a Child Restraint in a
Rear Seat Position
If your child restraint has the LATCH system,
see Lower Anchors and Tethers for Children
(LATCH) on page 53.
If your child restraint does not have the LATCH
system, you will be using the lap-shoulder
belt to secure the child restraint in this position.
Be sure to follow the instructions that came
with the child restraint. Secure the child in the
child restraint when and as the instructions say.
1. Put the child restraint on the seat.
2. Pick up the latch plate, and run the lap and
shoulder portions of the vehicle's safety belt
through or around the restraint. The child
restraint instructions will show you how.
59