Turn Signal/Multifunction Lever; Turn And Lane-Change Signals - Chevrolet 2006 Silverado 1500 Pickup Owner's Manual

To tilt the wheel, hold the steering wheel and pull the
lever. Then move the steering wheel to a comfortable
position and release the lever to lock the wheel in place.

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
•
G Turn and Lane Change Signals. See Turn and
Lane-Change Signals on page 3-7.
•
53 Headlamp High/Low-Beam Changer. See
Headlamp High/Low-Beam Changer on page 3-8.
•
Flash-to-Pass. See Flash-to-Pass on page 3-8.
•
N Windshield Wipers. See Windshield Wipers on
page 3-9.
•
L Windshield Washer. See Windshield Washer
on page 3-9.
I
•
Cruise Control. See Cruise Control on
page 3-10.
For information on the headlamps, see Headlamps on
page 3-13.

Turn and Lane-Change Signals

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return
automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by itself
when you release it.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.
3-7