Chevrolet 2006 Express Van Owner's Manual page 233

Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information label is
attached to the center pillar (B-pillar). With the driver's
door open, you will find the label attached below the
door lock post (striker). The tire and loading information
label shows the number of occupant seating positions
(A), and the maximum vehicle capacity weight (B) in
kilograms and pounds.
The Tire and Loading Information label also shows
the size of the original equipment tires (C) and
the recommended cold tire inflation pressures (D).
For more information on tires and inflation see Tires on
page 5-53 and Inflation - Tire Pressure on page 5-59.
There is also important loading information on the
vehicle Certification/Tire label. It tells you the Gross
Vehicle Weight Rating (GVWR) and the Gross Axle
Weight Rating (GAWR) for the front and rear axle.
See "Certification/Tire Label" later in this section.
Steps for Determining Correct Load Limit
1. Locate the statement "The combined weight
of occupants and cargo should never exceed
XXX kg or XXX lbs" on your vehicle's placard.
2. Determine the combined weight of the driver and
passengers that will be riding in your vehicle.
3. Subtract the combined weight of the driver and
passengers from XXX kg or XXX lbs.
4-31