Playing A Cassette Tape - Chevrolet 2004 Malibu Owner's Manual

Playing a Cassette Tape

Your tape player is built to work best with tapes that are
up to 30 to 45 minutes long on each side. Tapes longer
than that are so thin they may not work well in this player.
The longer side of the tape visible should face to the right.
If the ignition is on, but the radio is off, the tape can be
inserted and will begin playing. A tape symbol will appear
on the display whenever a tape is inserted. If you hear
nothing or hear a garbled sound, the tape may not be in
squarely. Press the eject button to remove the tape and
start over.
While the tape is playing, use the volume and seek
buttons just as you do for the radio. The display
will show TP and an arrow showing which side of the
tape is playing. The tape player automatically begins
playing the other side when it reaches the end of
the tape.
If you want to insert a tape while the ignition is off, first
press the eject button located to the left of the tape slot
or the DISP knob. Cassette tape adapter kits for portable
CD players will work in your cassette tape player.
Your tape bias is set automatically when a metal or
chrome tape is inserted.
If an error appears on the display, see "Cassette Tape
Messages" later in this section.
3-78
s (Reverse): Press this button to reverse the tape
rapidly. Press it again to return to playing speed.
The radio will play the last selected station while the
tape reverses. You may select stations during reverse
operation by turning the ADJ knob.
\
(Fast Forward): Press this button to advance the
tape rapidly. Press it again to return to playing speed.
The radio will play the last selected station while
the tape advances. You may select stations during fast
forward operation by turning the ADJ knob.
qL
(Change Side): Press this pushbutton to play
the other side of the tape.
x w
SEEK : Your tape must have at least three
seconds of silence between each selection for seek to
find the next or previous selection. Press the down arrow
to go to the previous selection on the tape if the current
selection has been playing for less than three seconds.
If pressed when the current selection has been playing
from 3 to 13 seconds, it will go to the beginning of
the previous selection or the beginning of the current
selection, depending upon the position on the tape.
If pressed when the current selection has been playing
for more than 13 seconds, it will go to the beginning of
the current selection.