Table of Contents
Advertisement
Function
Wi-Fi Setup
WiFi Setup
Reset
Reset
All
Info
Info
When a Dolby
Audio, Dolby
Atmos or DTS
audio format is
detected.
When the sound
bar successfully
connects to Wi-Fi.
LED Behavior
Single light with
sound upon
confirmation
All 10 LEDs will
flash 3 times once
settings are reset
−−
Dolby Audio, Dolby Atmos
or DTS audio format is
detected Indicator LED
Wi-Fi Indicator LED
Press the Next/Previous and Play buttons to select and confirm enabling or
disabling Wi-Fi Setup on your sound bar. Wi-Fi Setup allows the VIZIO SmartCast
App to reconnect the sound bar to Wi-Fi or paired bluetooth devices in the
event of a lost connection or if a new device is being paired.
Press the Next/Previous buttons to reset either Audio or All settings. Press the
Play button to select.
Audio - Only audio settings, such as bass and treble levels, will be reset.
All - All paired Bluetooth devices will be unpaired and all network settings will
be lost. All programmed IR remotes will also be removed. See the Reset to
Factory Default Settings section for more information.
Press the Play button to have the sound bar verbally announce the current
sound bar input and audio type being played with corresponding LED
indicators.
Dolby Audio and DTS are available on the HDMI ARC, HDMI In, and Digital
Optical Audio In inputs. Dolby Atmos is available on HDMI ARC and HDMI In
when connected to supported devices and streaming services. When a Dolby
or DTS signal is detected, the Dolby Atmos (Green) / Dolby Audio (White)/ DTS
(Amber) indicator LED will light up for 5 seconds before fading away.
When Wi-Fi is successfully set up via the VIZIO SmartCast app or through an
ethernet connection, the blue indicator LED will light up to confirm a successful
connection.
Description
English - 23
Advertisement
Table of Contents
