Table of Contents
Advertisement
LED INDICATORS
Press the Menu button and use the Up/Down Arrow buttons
on the remote to access the different functions and acoustic
settings of the sound bar. Each function and setting will
be displayed on the remote control's LCD display. The LED
indicators will behave differently with each function.
Function
Bluetooth
Pairing
BT Pair
Bass Levels
Bass
Treble Levels
Treble
Center Levels
Center
LED Behavior
(When searching for device)
Flash from Bottom to Top
and back continuously.
Two center LEDs
indicate Bass level 0.
Two center LEDs
indicate Treble level 0.
Two center LEDs
indicate Dialogue
is centered.
*Sound bar name may be different if the sound bar was previously setup using the SmartCast Mobile app.
Press the Enter button on the remote. The sound bar will be discoverable for
15 minutes. You can now search for the sound bar (VIZIO SB36514*) using
your Bluetooth Device. The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the sound bar.
Press the Next/Previous button to increase/decrease the bass level.
The LED indicators will move to the top with increasing levels and to the
bottom with decreasing levels.
Press the Next/Previous button to increase/decrease the treble level.
The LED indicators will move to the top with increasing levels and to the
bottom with decreasing levels.
Press the Next/Previous button to increase/decrease the presence of dialog
in the center channel. The LED indicators will move to the top when the
dialog presence is increased and to the bottom when the dialog presence is
decreased.
LED Indicators are located here.
Description
English - 19
Advertisement
Table of Contents
