Specify Wireless Settings - TP-Link Archer AX23 User Manual

Chapter 6
6 1

Specify Wireless Settings

The router's wireless network name (SSID) and password, and security option are preset
in the factory. The preset SSID and password can be found on the label of the router.
You can customize the wireless settings according to your needs.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Wireless or Advanced
• To use the Smart Connect function:
The Smart Connect function lets you enjoy a more high-speed network by assigning
your devices to best wireless bands based on actual conditions to balance network
demands.
1. Go to Advanced >
2. Enable Smart Connect.
3. Keep the default values or set a new SSID and password, and click SAVE. This SSID
and password will be applied for the 2.4GHz and 5GHz wireless networks. If you want
to configure the wireless settings separately for each band, untick the checkbox to
disable this feature.
• To enable or disable the wireless function:
1. Go to Wireless or Advanced
2. The wireless function is enabled by default. If you want to disable the wireless function
of the router, just untick the
all the wireless settings will be invalid.
• To change the wireless network name (SSID) and wireless password:
1. Go to Wireless or Advanced
> Wireless
Wireless > Wireless Settings.
> Wireless
Enable checkbox of each wireless network. In this case,
> Wireless
> Wireless Settings.
> Wireless Settings.
> Wireless Settings.
Wireless Settings
28