Radio - Pioneer FH-S720BS Operation Manual

2
Press the M.C. dial to display the main menu.
3
Turn the M.C. dial to select [INITIAL], then press to confirm.
4
Turn the M.C. dial to select an option, then press to confirm.
NOTE
The options vary depending on the unit.
Menu Item
REAR-SP
[FUL]
[SW]
SP-P/O MODE
[REAR/SUB.W]
[SUB.W/SUB.W]
[REAR/REAR]
SYSTEM UPDATE
[SYSTEM INFO], [S/
W UPDATE]
SXM RESET
[YES], [NO]
SYSTEM RESET
[YES], [NO]

Radio

The tuner frequencies on this unit are allocated for use in North America. Use in other
areas may result in poor reception.
Description
Select when there is a full-range speaker connected to the rear
speaker output leads.
Select when there is a subwoofer connected directly to the rear
speaker output leads without any auxiliary amplifier.
Select when there is a full-range speaker connected to the rear
speaker output leads and there is a subwoofer connected to the
RCA output.
Select when there is a passive subwoofer connected directly to
the rear speaker output leads and there is a subwoofer
connected to the RCA output.
Select when there are full-range speakers connected to the rear
speaker output leads and RCA output. If there is a full-range
speaker connected to the rear speaker output leads, and the
RCA output is not used, you may select either [REAR/SUB.W] or
[REAR/REAR].
Select [SYSTEM INFO] to confirm the latest system information
on the unit.
Select [S/W UPDATE] to update the unit to the latest software
and initialize the unit settings. For details on the latest software
and updating, visit our website.
Select to initialize the SiriusXM settings.
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
- 10 -