JVC KW-V250BT Instruction Manual page 50

Settings Settings
<Bluetooth Setup>
Configure settings for using a Bluetooth device, such
as connection and other general operations. For
details, see "Bluetooth settings" on page 39.
<Maestro Setup>
(Only for KW-V350BT Region 1)
Get information, and change the settings for using the
ADS adapter.
<Beep>
This setting is available only when 2-way speaker
system is selected. (Page 41)
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
<SETUP Memory>
Memorize, recall, or clear the settings you have made.
• The memorized settings are kept even when the unit
is reset.
Touch [Yes] to display the setting screen, then select
an operation:
• Recall: Recalls the memorized settings.
• Memory: Memorizes the current settings.
• Clear: Clears the currently memorized settings and
return to the factory (initial) settings.
• Cancel: Cancels.
A confirmation message appears. Touch [Yes].
48 ENGLISH
<DivX(R) VOD>
(Only for KW-V350BT Region 4)
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit's Registration Code is overwritten
for copyright protection.
• Touch [Enter] to display the information.
• To return to the previous screen, touch [OK].
<Initialize>
Initialize all settings you have made. Touch and hold
[Enter] to initialize the settings.
• After initializing the settings, adjust the settings on
the <Initial Settings> screen.
<Serial Number>
(Only for KW-V350BT Region 1)
Displays the serial number.
<Touch Panel Adjust>
Adjust the touch positions of the buttons on the
screen.
Touch the center of the marks at the upper left (1),
the lower center (2), then the upper right (3) as
instructed.
Touch Panel Adjust
Cancel
• To reset the touch position, touch [Reset].
• To cancel the current operation, touch [Cancel].
<Steering Remote Control Setting>
(Only for KW-V350BT Region 4)
Assign functions to the keys of the remote controller
on the steering wheel.
• This function is available only when your car is
equipped with the electrical steering remote
controller.
• You can only register/change the functions while
you are parked.
• If your steering remote controller is not compatible,
learning may not be completed and an error
message may appear.
1
Touch [Set] for <Steering Remote Control
Setting> to display the setting screen.
2
Press and hold a button on the steering
remote controller to register or change.
3
Select a function to assign to the selected
button.
Steering Remote Control Setting
Please select the function to assign to the button.
Reset
VOL
VOL
ATT
SRC
Done