Chevrolet 2001 Impala Owner's Manual page 91

D
Horn Chirp On Timer (Available with Remote
Keyless Entry)
D
Remote Keyless Entry Transmitter Programming
(Available with Remote Keyless Entry)
D
Return to Original Factory Settings
(Available for All)
D
Exit Vehicle Customization Mode
Entering Programming Mode: To reset or customize
the features, you must first enter the vehicle
customization main menu. To enter the main menu, do
the following:
1. Turn the ignition to ACC or ON and the radio to off.
2. Press and hold the DISP button on the radio for at
least five seconds until SETTINGS is displayed.
3. Press the SEEK up or down arrows to scroll through
each available feature on your main menu.
4. Press the PREV or NEXT buttons to scroll through
the lower menu. An asterisk will appear next to the
item that is the current setting.
The following information shows how to reset or
customize features after entering the main menu:
--
SETTINGS Display Current Settings
--
OIL LIFE Oil Life Reset: This feature allows you
to reset the GM Oil Life System
change, see "Engine Oil" in the Index. Be careful not
to reset the OIL LIFE accidentally at any time other
than when the oil has been changed. It can't be reset
accurately until the next oil change. To clear the
CHANGE ENGINE OIL light from the instrument panel
cluster and reset the oil life monitor:
1. Scroll, using the SEEK up or down arrows, until OIL
LIFE appears on the display.
2. Press the PREV or NEXT button to enter the
submenu. RESET will then be displayed.
3. Press the DISP button to reset. A chime will be heard
to verify the new setting and DONE will be
displayed for one second.
The CHANGE ENGINE OIL light is now reset.
You can either exit the programming mode by following
the instructions later in this section or program the next
feature available on your vehicle.
t
Monitor after an oil
2-21