Table of Contents
Advertisement
If the belt stops before it reaches the buckle, tilt the
3. To make the lap part tight, pull down on the buckle
latch plate and keep pulling until you can buckle it.
end of the belt as you pull up on the shoulder part.
Pull up on the latch plate to make sure it is secure.
If the belt is not long enough, see "Safety Belt
Extender" at the end of this section. Make sure the
release button on the buckle is positioned so you
would be able to unbuckle the safety belt quickly if
you ever had to.
1-28
Advertisement
Chapters
Table of Contents
