Advertisement
Using Foam-Type Cleaner on Fabric
1.
2.
3.
4.
5 .
6.
7.
8.
9.
Vacuum and brush the area to remove any loose dirt.
Always clean a whole trim panel
or
section. Mask
surrounding trim along stitch or welt lines.
Mix Multi-Purpose Powdered Cleaner following the
directions on the container label.
Use suds only and apply with a clean sponge. Don't
saturate the material and don't rub it roughly.
As soon as you've cleaned the section, use a sponge
to remove the suds.
Rinse the section with a clean, wet sponge.
Wipe off what's left with a slightly damp paper towel
or cloth.
Dry
it
imnlediately with a blow dryer.
Wipe with a clean cloth.
Using Solvent-Qpe Cleaner on Fabric
First. see
if you
have to use solvent-type cleaner at all.
Some spots and stains will clean off better with just
water and mild soap.
If you need to use a solvent:
1. Gently scrape excess soil from the trim material
with
a clean. dull knife or scraper.
2 . Use very little cleaner, light pressure and clean cloths
(preferably cheesecloth). Cleaning should start at the
outside of the stain, "feathering" toward the center.
3. Keep changing to a clean section of the cloth.
4. When you clean
it
stain from fabric. immediately
dry the area
with a blow
dryer to help prevent a
cleaning
ring.
6-50
Hide quick links:
Advertisement
