Advertisement
Front Reading Lamps
1. Use a coin or small screwdriver to unscrew
the
center of the overhead console lamp lens while
pressing in on the lamp assembly.
2 . Remove the lamp assembly from the console.
3. Remove the bulb assembly from
the lamp assembly.
4. Pull the bulb straight out of the base.
5 . Put a new bulb into the bulb base.
6 . Install the bulb assembly into the lamp assembly.
7. Place the lamp assembly into the console, turning
it
to latch
it in
place.
8. Install the lens.
Vanity Mirror Lamps
1. Insert the blade of a small screwdriver into the center
slot
at
the bottom of the lens.
2. Gently pry the screwdriver down in order to
lift
out
the lens.
3. Pry out the bulb.
4. Press the new bulb into place.
5 . Slide the side tabs of the lens under the side of the
vanity assembly frame.
6. Rotate the lens downward.
7. Snap the lens into the frame.
Windshield Wiper Blade Replacement
See "Normal Maintenance Replacement Parts" in the
Index for the proper type of replacement blade.
I
1
NOTICE:
Use care when removing or installing a blade
assembly. Accidental bumping can cause the arm
to fall back and strike the windshield.
1. To remove the old wiper blades. lift the wiper arm
until
it
locks into a vertical position.
6-38
Hide quick links:
Advertisement
