Advertisement
FWD (6): Press
this button to advance quickly to
another part of the tape. Press the button again to return
to playing speed. The radio will play the last-selected
station while the tape advances.
AM-FM:
Press this button to play the radio when a tape
is in the player.
TAPE AUX: Press
this button to change to the tape
function when the radio is on. The tape symbol with an
arrow will appear on the display when the tape is active.
If your system is equipped with a remote playback
device, pressing this button a second time will allow the
remote device to play.
EJECT
Press this button to remove the tape. The radio
will play. EJECT may be activated with either
the
ignition or radio off. Cassettes may be loaded with the
radio off if this button is pressed first.
CLN:
This message may appear on the display. If it
does, your cassette tape player needs to be cleaned. It
will still play tapes, but you should clean
it
as soon as
possible to prevent damage to your tapes and player.
See "Care of Your Cassette Tape Player" in the Index.
After you clean the player, press and hold EJECT for
five seconds to reset the CLN indicator. The radio will
display
---
to show the indicator was reset.
CD
Adapter Kit
It is possible to use
a CD
adapter
kit
with your cassette tape
player after activating the bypass feature
on your tape player.
To activate the bypass feature, the ignition must be on.
Turn your radio off. Press TAPE/AUX
and
hold for three
seconds. After three seconds, the tape symbol in the
display will flash for two seconds indicating the feature is
active. Turn the radio on and insert the adapter.
This override feature will remain active until EJECT
is pressed.
AM-FM Stereo with Compact Disc Player
and Automatic Tone Control (Option)
3-16
Advertisement
