Chevrolet 1995 S-10 Pickup Owner's Manual page 210

Using the wheel
wrench, loosen all the
wheel nuts. Don't
remove them yet.
Do not jack up the vehicle with people in or near the vehicle.
Position the jack under the vehicle.
A. Front Frame Hole
B.
Rear Frame Hole (ZR2)
C . Spring Hanger Hole (Standard Pickups)
Your vehicle has a hole in the frame near each front wheel for the jack. On
standard pickups there is a hole in the spring hanger near each rear wheel
for the jack. On ZR2 models, the hole for the jack is located in the frame in
front of each rear wheel. Fit the jack into the hole nearest the flat tire.
5-27