Assembly/Panel Removal; Stand Removal; Ir Board Control Unit - Philips 32PFS5803/12 Service Manual

3.2 Assembly/Panel Removal

3.2.1

Stand removal

1. Remove the fixation screws [1] that secure the stand.
2. Take the stand bracket out from the set.
1
1

3.2.2 IR board Control Unit

1. Unplug the connector from the SSB.
Caution: be careful, as these are very fragile connectors!
2. Remove fixation screws [1] and connector [2] from the IR board control unit.
3. Remove the IR lens, IR board from the DECO_REAR_COVER.
When defective, replace the whole unit.
1
1
1
2