Cable Dressing (49" 5102 Series); Assembly/Panel Removal - Philips 5102 Series Service Manual

3.2 Assembly/Panel Removal

3.2.1 Stand removal
1. Remove the fixation screws [1] that secure the stand.
2. Take the stand bracket out from the set.
2
3.2.2 IR board Control Unit
1. Unplug the connector from the SSB.
Caution: be careful, as these are very fragile connectors!
2. Remove all the fixation screws [1],and connector [2] from the IR board control unit.
When defective, replace the whole unit.

Cable dressing (49" 5102 series)

1 1
1
1
1