Philips 24PFS5603/12 Service Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. TV
  5. 24PFS5603/12
  6. Service manual

Philips 24PFS5603/12 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Chassis name
TPS18.1E LA
Published by AMY/SC 1806 Quality
2018
TP Vision Netherlands B.V.
©
All rights reserved. Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips Electronics N.V. or their respective owners.
TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust
earlier supplies accordingly.
PHILIPS and the PHILIPS' Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
Platform
MSD92L
Subject to modification
TPS18.1E
Model name
24PFS5603/12
24PFT5603/05
24PFT5603/12
32PFS5603/12
32PFT5603/05
32PFT5603/12
EU
3122 785 20630
2018-Feb-09

Advertisement

Table of Contents
loading

Related Manuals for Philips 24PFS5603/12

Summary of Contents for Philips 24PFS5603/12

  • Page 1 Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.

  • Page 2: Table Of Contents

    Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.

  • Page 3: Product Information

    - Headphones: Stereo 3.5mm mini-jack detailed product information, please visit For 32PFT5603 www.philips.com/support TV Rear - HDMI 1 ARC: HDMI Audio Return Channel Display Type - HDMI 2 - DIGITAL AUDIO OUT: SPDIF Diagonal screen size - AUDIO IN (DVI): Stereo 3.5mm mini-jack 60 cm / 24 inch •...
  • Page 4 * Network port is only for UK models * Only for DVB-T2, DVB-S2 Reception Sound For PxT series TV Output power (RMS) : • - Aerial input : 75 ohm coaxial (IEC75) 24” series: 6W - Tuner bands : Hyperband, S-Channel, UHF, VHF 32”...

  • Page 5: Precautions, Notes, And Abbreviation List

    Refer to the diversity tables for the correct values. two pins of the Mains/AC Power plug. • The correct component values are listed on the Philips • Check the cabinet for defects, to prevent touching of any Spare Parts Web Portal.
  • Page 6 • Mix of lead-free soldering tin/parts with leaded soldering tin/parts is possible but PHILIPS recommends strongly to avoid mixed regimes. If this cannot be avoided, carefully clear the solder-joint from old tin and re-solder with new tin.
  • Page 7 originating from the USA and used e.g. in • Always respect voltages. While some may not be dangerous in themselves, they can cause unexpected LATAM and AP-NTSC countries reactions that are best avoided. Before reaching into a B-TXT Blue TeleteXT powered TV set, it is best to test the high voltage Centre channel (audio) insulation.
  • Page 8 G-TXT Green TeleteXT distance is 6.5 MHz. L' is Band I, L is all H_sync to the module bands except for Band I High Definition LG.Philips LCD (supplier) Hard Disk Drive Loudspeaker HDCP High-bandwidth Digital Content Protection: LVDS Low Voltage Differential Signalling A “key”...
  • Page 9 Serial Peripheral Interface bus; a 4-wire module, implementing the CA system for a synchronous serial data link standard host (e.g. a TV-set) S/PDIF Sony Philips Digital InterFace Power On Reset, signal to reset the uP SRAM Static RAM PSDL Power Supply for Direct view LED...
  • Page 10 Thin Film Transistor toward external amplifier Total Harmonic Distortion Vestigial Side Band; modulation method TMDS Transmission Minimized Differential WYSIWYR What You See Is What You Record: record Signalling selection that follows main picture and Transport Stream sound TeleteXT WXGA 1280 × 768 (15:9) TXT-DW Dual Window with TeleteXT XTAL...

  • Page 11: Mechanical Instructions

    3. Mechanical Instructions 3.1 Cable Dressing ECN408 ECN701 CN9101 CN408 CN701 CN8605 CN401 MAIN POWER SUPPLY SSB (1053) (1054) ECN8605 ECN401 CN601 IR/LED BOARD (1056) Cable dressing (24" 5603 series) ECN601 ECN601 LOUDSPEAKER LOUDSPEAKER (1184) (1184) Back cover overview (24" 5603 series)

  • Page 12: Cable Dressing (32" 5603 Series)

    ECN408 CN408 CN701 CN8601 CN401 SSB (1053) ECN701 CN9101 CN601 MAIN POWER SUPPLY (1054) ECN601 ECN401 to Key&IR ECN601 LOUDSPEAKER LOUDSPEAKER IR/LED BOARD (1184) (1184) (1056) Cable dressing (32" 5603 series) KEY BOARD (1057) Back cover overview (32" 5603 series)

  • Page 13: Assembly/Panel Removal

    3.2 Assembly/Panel Removal 3.2.1 Stand removal 1. Remove the fixation screws [1] that secure the stand. 2. Take the stand bracket out from the set. (24” 5603 Series) (32” 5603 Series)
  • Page 14 3.2.2 IR board Control Unit 1. Unplug connector [2] from the IR board control unit. 2. Remove the IR lens, IR board from the DECO_REAR_COVER. When defective, replace the whole unit. 3.2.3 Rear Cover Warning: Disconnect the mains power cord before removing the rear cover. 24”...
  • Page 15 32” 5603 Series: 1. Remove all the fixation screws [2] that secure the back cover. 2. Unplug the connector which from SSB to Key board carefully. 3. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
  • Page 16 3.2.4 Keyboard Control Unit 1. Release the connector from the SSB Board. Caution: be careful, the Keyboard is catch on the Back cover, please be careful to avoid damage the fragile connectors! 2. Remove all the fixation screws and connector from the keyboard control panel then take it out from the Back cover. When defective, replace the whole unit.
  • Page 17 3.2.8 LCD Panel 1. Remove the SSB as described earlier. 2. Remove the PSU as described earlier. 3. Remove the keyboard control panel as described earlier. 4. Remove the stand bracket as described earlier. 5. Remove the IR/LED as described earlier. 6.

  • Page 18: Service Modes

    4. Service Modes 4.1 Service Modes The Service Mode feature is split into following parts: Service Alignment Mode (SAM).  Factory Mode.  Customer Service Mode (CSM).SAM and the Factory mode offer features, which can be used by the Service engineer to repair/align a TV set. ...
  • Page 19 With the “LEFT/RIGHT” keys, it is possible to:  – (De) activate the selected menu item. – (De) activate the selected sub menu. – Change the value of the selected menu item. When you press the MENU button once while in top level SAM, the set will switch to the normal user menu (with the SAM mode still active in the ...
  • Page 20 Press the following key sequence on the remote control transmitter: from the “menu/home” press “1999”, directly followed by the  “Back/Return” button. Do not allow the display to time out between entries while keying the sequence. After entering the Factory mode, we can see many items displayed, use the UP/DOWN keys to display the next/previous menu items Factory mode overview How to Exit the Factory mode Use one of the following methods:...
  • Page 21 How to Activate CSM To activate CSM, press the following key sequence on a standard remote control transmitter: “123654” (do not allow the display to time out between entries while keying the sequence). After entering the Customer Service Mode, the following items are displayed. use the Right/Left keys to display the next/previous menu items Note: Activation of the CSM is only possible if there is no (user) menu on the screen! CSM Overview...

  • Page 22: Software Upgrading, Error Code And Panel Code

    5. Software Upgrading, Error code and Panel Code 5.1.1. The following update is for .pkg file. Rename the file to “upgrade_loader.pkg”. Prepare a USB memory (File format: FLAT, Size: 1G~8G). Copy the software to USB flash disk (root directory). Switch off the TV and Insert the USB memory stick that contains the software update files in one of the TV’s USB 2.0 port. Switch on the TV.
  • Page 23 Upgrade in progress. After software upgrade complete, select [Restart] to reboot TV. Step 3: Check the SW version After burning software, TV will restart. Press “123654”, enter Customer Service Mode to check if the software version is correct. Caution: Please make sure that software upgrade is finished before unplug the USB and AC power!
  • Page 24 5.1 Error Code 5.2.1 Introduction Error codes are required to indicate failures in the TV set. In principle a unique error code is available for every: • Activated (SW) protection. • Failing I2C device. • General I2C error. The last five errors, stored in the NVM, are shown in the Service menu’s. This is called the error buffer. The error code buffer contains all errors detected since the last time the buffer was erased.
  • Page 25 Press the following key sequence on a standard RC transmitter: “062598” directly followed by MENU and “xxx”, where “xxx” is a 3 digit decimal value of the panel type: see column “Display Code” in below tab. After resetting the Display Code, restart the set immediately. CTN_ALT BOM# Panel Type Display Code 24PFS5603/12 TPM238WF1-LF1L0.Q S1G 24PFT5603/05 TPM238WF1-LF1L0.Q S1G 24PFT5603/12 TPM238WF1-LF1L0.Q S1G...

  • Page 26: Trouble Shooting

    Trouble shooting 2016年12月10日 2016/4/8 Picture-related Intermittent Ask Photo Picture ? problem ? Menu Smarkt Signal SW latest ? Backlight? issue function? issue SSB+LVDS+Panel Update SW LED working ? PSU/SSB Problem solved ? Sound ? PSU+ Panel Finish SW+SSB...
  • Page 27 Trouble shooting 2016年12月10日 2016/4/8 Audio/Sound- related Intermittent Sound ? problem ? Setting SW latest ? Mute ? issue issue Update SW Extra device Check extra connect? device Problem solved ? Factory setting Finish Sound back ? Setting issue SSB+SPK...
  • Page 28 6.Slow response to user interaction 7.Switches ON by itself 8.Switches Off by itself 9.Stuck in standby mode / unable to start up 10.Stuck on PHILIPS / ANDROID logo 11.CAM not recognized by TV 12.CAM authentication issue 13.Misc CAM issue 14.IP-EPG issues 15.BC-EPG issues...

  • Page 29: Electrical Diagram

    7. Electrical Diagram Block diagram...
  • Page 30 7.2 Power Supply Power architecture of this platform: AUDIO LVDS Platform power Display power CN8605 for 715G7735P ON/OFF CN8601 for 715G7734P Platform PS_ON MSD92L 12V_A 5V_STB CN701 AC-input + Main filter For 32” AC IN 7.3 Power tree Power Board System Supply +12V_Normal/ 20.6W/ 1722mA Power Board Audio Supply +12V_Audio/ 10W/ 925mA Q701 +12V_Normal...
  • Page 31 7.4 Power layout SSB L402 +5V_SB L401 +1.1V_VDDC Q410 +5V_Normal R4097 +3.3V_Normal C4092 +1.5V_DDR C4163 +3.3V_SB C4103 +5V_USB FB412 +3.3V_TUN Power SSB Top View...
  • Page 32 Power SSB Bottom View...

  • Page 33: Ic Data Sheet

    8. IC Data Sheets 8.1 AD87010-LG48NRY (IC U601)
  • Page 34 8.2 TDSY-G430D (TU101)

  • Page 35: Circuit Diagrams

    9.Circuit Diagrams 9.1 A 715G7734 PSU (For 32” 5603 Series) 9-1-1 POWER R8615 C8617 22K 1/4W 100PF 500V +18V FB8605 L8602 BEAD VLED+ 47uH D8601 C8601 C8605 SR506 330UF 35V 0.1uF 50V C8621 R8612 R8611 C8623 Q8601: 357G0763100601 or D8602 0.1uF 50V 100K 357G0763100605...
  • Page 36 9-1-2 LED DRIVER +18V BD9901 NC/KBJ608G-FUC BD9902 GBL408-C D9110 D9109 SR510-22 SR34H ZD9101 BZT52-B22 +12V_A D9111 +12VS SR510-22 R9130 Q9306 1K OHM L9101 D9112 NC/P1604ED SR510-22 +12V NR9901 C9101 R9302 2.5R D9101 C9121 NC/470uF 25V C9110 NC/100K 1/8W 470uF 25V JUMPER SR510-22 C9109...

  • Page 37: 715G7735 Psu

    9.2 A 715G7735 PSU (For 24” 5603 Series) 9-2-1 POWER BD9901 36W: BD9901 093G 50460518 KBP208G-C 45W: BD9901 393G0050460A02 36W: L8601 373G0253214X02 45W: L8602 073G 253214 Cold R8612 C8605 L8601 NC/22K 1% NC/100PF 500V NC/47UH FB9903 FB9906 FB9905 D8601 BEAD 127R BEAD SR510-22...

  • Page 38: 715G9249 Ssb

    9.3 B 715G9249 SSB 9-3-1 System Power MAIN POWER +3.3V_Standby 5V STANDBY TO 5V NORMAL POWER Controller Inverter controler R4084 CN701 +5V_Standby NC/2.2K1/16W R4085 +5V_Normal +3.3V_Standby CONN 0R05 OHM BL-ON/OFF BL-ADJUST R4086 STANDBY Q410 BL-ADJUST 100R R4087 MTP2317N3 R4109 +12V_Normal NC/0R05 OHM +12V_AUD R4102...
  • Page 39 9-3-2 MSD92LGSW2 RXO0- RXO0- SPI NOR FLASH DDR3 POWER RC is for EMI RXO0+ RXO0+ FB400 120R RXO1- RXO1- CORE POWER TPV:E-Pad I2S-MCK I2S_MCLK RXO1+ Mini LVDS AVDD_MOD1 I2SOUTC_MCK RXO1+ RXO2- FB401 120R for CNL1 +1.5V_DDR DVDD_DDR RXO2- connect to GND 1 I2S-BCK I2S_SCLK RXO2+...
  • Page 40 9-3-3 LVDS SZ LVDS Connector RXO0- RXO0- +3.3V_Normal RXO0+ RXO0+ RXO1- PANEL_POWER RXO1- RXO1+ RXO1+ RXO2- RXO2- RXO2+ R4113 RXO2+ CN408 RXOC- RXOC- NC/4.7K 1/16W RXOC+ RXOC+ RXO3- RXO3- RXO3+ RXO3+ LVDS_SEL PANEL_ON/OFF RXO4- R4114 RXO4- RXO0- RXO0+ RXO4+ NC/4.7K RXO4+ RXO1- RXO1+...
  • Page 41 9-3-4 HDMI/ARC/UART Rear HDMI 1 HDMI1/5V HDMI1_RX0P ARC DETECT HDMI1_RX0P HDMI1_RX0N HDMI1_RX0N HDMI1/5V CN501 HDMI1_RX1P HDMI1_RX1P HDMI1_RX1N R4059 HDMI1_RX1N HDMI1_RX0P R4079=22K(ARC)-->0(NOT ARC) HDMI1_RX2P R4060 TMDSD0+ HDMI1_RX2P HDMI1_RX0N HDMI1_RX2N TMDSD0- HDMI1_RX2N R4077 HDMI1_CLKP HDMI1_CLKP HDMI1_RX1P HDMI1-HPD HDMI1_CLKN HDMI1_CLKN TMDSD1+ HDMI1_RX1N Q400 HDMI1_SCL TMDSD1- HDMI1_SCL...
  • Page 42 9-3-5 USB/SPDIF USB 2.0 SPDIF SPDIF-OPTICAL +5V_USB 388G359J5B1VAT 388G359J5B1VYG CN103 R4133 5.1R 1/16W USB CONN USB0_DM R4134 5.1R 1/16W USB0_DP SPDIF_OUT ZD419 ZD420 SPDIF_OUT CN603 +5V_Normal 088G352F6B3AYG Grounding 088G352F6B3ACL ZD421 NC/AZ5125-01H.R7G NC/AZ5125-01H.R7G FIBER-OPTIC V/T 3P C4106 NC/AZ5125-01H.R7G 100NF 16V 8.5mm optical +5V_Normal +5V_USB U412...
  • Page 43 9-3-6 SCART/VGA/RJ45/Audio_in SCART PC / DVI Audio in SCART IN 388G355HLB1EYG 388G355HLB1EAT SCART-FS C4158 C4159 SCAR-LIN CN151 SCAR-RIN 470pF 50V 470pF 50V R4139 SCART-RIN R4140 R4141 75 OHM +-5% 1/16W 10K +-1% 1/16W 10K +-1% 1/16W R4142 75 OHM +-5% 1/16W R4143 R4144 SCART-LIN...
  • Page 44 9-3-7 Tuner TUNER POWER DVB-C/T/T2 DIF 1'st Source :LGIT TDSY-G430D (394GPASEBIL02G) C4118 C4119 +3.3V_TU +5V_Normal U414 2'nd Source : TCL ST42CS-2-E (394GNPALALL32L) NC/10PF 50V NC/10PF 50V AZ1117CH-3.3TRG1 VOUT TUN_DIF-#T2 TU101 T2 TUNER R4174 R4175 R4176 DIF- 0R05 1/16W 0R05 1/16W 0R05 1/16W C4122 C4121...
  • Page 45 9-3-8 Amplifier/HP AMP_3V3 I2SOUTC_DATA I2SOUTC_DATA 4 I2SOUTC_WS R4371 I2SOUTC_WS I2SOUTC_BCLK 100K I2SOUTC_BCLK 4 HS600 I2SOUTC_MCK I2SOUTC_MCK AMP-INL R4375 PIN 7 AMP-INL AMP-INR NC/1K 1/16W 5% AMP-INR PIN 6 R4374 AMP_PDN AMP_MUTE AMP_MUTE I2SOUTC_DATA SDATA AMP_PDN R4357 100R 1/16W 5% AMP_PDN M-SCL 33 OHM 1/16W R4359...
  • Page 46 9-3-9 NAND Flash NAND FLASH +3.3V_Standby +3.3V_Standby U402 R4241 I/O7 PCM-A7 I/O6 PCM-A6 R4252 0R05 OHM NAND-RBZ-1 NAND_RBZ PCM-A5 I/O5 R4251 0R05 OHM NAND-REZ-1 NAND_REZ I/O4 PCM-A4 R4250 0R05 OHM NAND-CEZ-1 NAND_CEZ R4246 NC/0R05 OHM Micron Nand need to NC NAND-CLE-1 R4245 0R05 OHM...
  • Page 47 9-3-10 PCMCI TS0-D0~D7 CI Bus Power Control PCMCIA POWER TS0-D0 TS0_D0 R4254 22 OHM 1/16W CN159 TS0-D1 TS0_D1 R4255 22 OHM 1/16W PCMCIA CARD TS0-D2 R4256 22 OHM 1/16W TS0_D2 TS0-D3 R4257 22 OHM 1/16W TS0_D3 PCM_CD1_N PCM-D3 TS0-D4 R4258 22 OHM 1/16W TS0_D4 CD1# TS0-D3...
  • Page 48 9-3-11 BT B/T FUNCTION for EMI solution  NC , C640 , C641, C642 , C643 狠 ) BT_LED trace (connector 糤 470pF bypass cap. +3.3V_Standby BT-EN BT_EN BT_LED CN605 BT_LED CONN BT_AUD_R BT_AUD_R BT_AUD_L BT_AUD_L BT_AUD_L_P BT_AUD_L_N BT_AUD_R_P R4319 R4320 BT_AUD_R_N R4264...
  • Page 49 9-3-12 HOTEL function For BUH daughter board UART-RX UART-RX 4,6,8 UART-TX 4,6,8 UART-TX BATH_AMP_EN CN606 BATH_AMP_EN STANDBY NC/CONN STANDBY IR_RC IR_RC UART-RX IRIN IRIN UART-TX AUOUT_L0 AUOUT_L0 AUOUT_R0 AUOUT_R0 BATH_L_R BATH_AMP_EN IR_RC IRIN STANDBY +5V_Normal +3.3V_Standby C4228 C4229 C4230 NC/1N 50V NC/1N 50V NC/1N 50V Bathroom SPK audio out for BUH...

  • Page 50: 715G8576 Ir/Led Panel

    9.4 J 715G8576 IR/LED Panel (For 24” 5603 Series) 9-4-1 IR LED LED_R 15K 1/16W 5% Vout TSOP75436TR 2.2uF 10V CONN 033G8032 5F 2K7 1/16W 5% LED1 GPSS008RC4 LED_R 22K 1/16W 5% BC847BW 100N 16V 22K 1/16W 5%...

  • Page 51: 715G8767 Ir/Led Panel

    9.5 J 715G8767 IR/LED Panel (For 32” 5603 Series) 9-5-1 IR & LED & Light Sensor CN201 Standby LED CONN IR Receiver 3V3SB LED_R RC-IR R201 2K7 1/16W 5% 3V3SB 3V3SB 3V3SB ZD202 NC/AZ5125-01H.R7G LED201 R203 R204 GPSS008RC4 NC/2K7 1/16W 5% 100R 1/16W 5% ZD203 AZ5125-01H.R7G...

  • Page 52: 715G7088 Keyboard Control Panel

    9.6 E 715G7088 Keyboard control panel (For 32” 5603 Series) 9-6-1 Key CONN TO SSB JOYSTICK CN01 KEY 1 AMBI_SPI_CLK AMBI_SPI_MOSI 100PF 50V +12V_AMBI +12V_AMBI GND_AL AMBI_TEMP +12V_AMBI GND_AL TACT SW 6P SW01 GND_AL GND_AL GND_AL Right Center Down Left CONN 13P 1.25MM ------ ------...

  • Page 53: Styling Sheet

    10. Styling Sheets 10.1 5603 series 24” 0040 1053 1050 1184 1054 0030 1056 0036...

  • Page 54: 5603 Series 32

    10.2 5603 series 32” 0040 1053 1050 1184 0063 1057 1054 1184 0030 0036 1056...

This manual is also suitable for:

24pft5603/0524pft5603/1232pfs5603/1232pft5603/0532pft5603/12

Table of Contents