Table of Contents
Advertisement
Preparations
•
Turn on the TV and select the video input source.
To use the remote control for TV
Note:
You must set the remote control code for TV first. (See
Page E8.)
1. Press [(TV CONTROL) POWER] to turn on the power.
•
When using the remote control, the Transmitter
Window on the remote control must be pointed toward
your TV.
2. Press [(TV CONTROL) INPUT] to select the video input
source.
3. Set the TV volume minimum.
Notes:
•
Only remote-controlled TVs can be operated using this
remote control. (Refer to your TV instruction manual for
more details.)
•
There may be some older TV models that cannot be
operated with this remote control. If this is the case, use
the original remote control supplied with the TV.
•
Select the playback picture size according to the aspect ratio
of the TV. (See "Setting Picture" in "INITIAL SETTINGS" on
Page E55.)
Important Note:
•
This instruction manual explains the basic instruction of this
DVD video player using the remote control unit.
•
Some DVD video discs have different functions that may
not be explained in this instruction manual. You may need
extra instructions. In this case, please follow the instructions
displayed on the TV screen or jacket or case of the disc.
•
"
" may appear on the TV screen during operation. This
icon means that the function is not available on the disc
now.
•
For improvement, on-screen displays subject to change
without notice.
Basic Playback
Notes:
•
Do not touch the disc tray while it is moving.
•
Never place anything except a disc on the disc tray. Foreign
objects can damage the unit.
•
Do not apply excessive force to the disc tray.
•
Discs must be placed on the disc tray one at a time.
When operation buttons are pressed, that operation is displayed
on the TV screen. The display turns off after several seconds.
1. Press [POWER].
2. Press [DVD] to select DVD function.
•
"SANYO" logo appears on the TV screen.
•
The DVD indicator on the front panel will light.
•
"No Disc" appears on the TV screen.
3. Press [q OPEN/CLOSE] (or OPEN/CLOSE on the remote
control).
•
"q" appears on the TV screen and the disc tray opens.
Note:
To open or close the disc tray, be sure to press [OPEN/
CLOSE]. Do not press the disc tray with your hand.
DISC PLAYBACK
4. Place the disc with the label facing up on the disc tray.
For 5-inch (12cm) disc
5. Press [OPEN/CLOSE] again.
The disc tray closes. "Reading" appears on the TV screen.
Note:
Some discs may start playback automatically.
6. Press [a] (or [PLAY a]) to start playback.
•
Example:
1
/ON
Note:
If the disc is loaded with the label side downward (and it is a
single sided disc), or if a badly scratched disc is loaded, "Err
(Error)" appears on the FL display and "Incorrect Disc" appears
on the TV screen. If this occurs, load the disc correctly or
replace the disc.
If a menu screen appears on the TV screen...
Select the desired menu by pressing [4],
[a], [5] or [b] (or the number buttons),
then press [ENTER]. Playback of the
selected menu starts.
Note:
For more details, please refer to the jacket or case of the disc.
-E39-
"a" appears.
Elapsed playing time
REC
CHANNEL
EJECT
VIDEO IN
L-AUDIO IN-R
1
For 3-inch (8cm) disc
6 4
3, 5
VCR/DVD
AM/FM
-
PRESET
+
VOLUME
OPEN/CLOSE
STOP
PLAY
MINI
MAX
3, 5
2
6
Advertisement
Table of Contents
