Garmin GTS 8 Series Installation Manual page 38

Do not pull on the cable when removing the QMA plug from the jack.
To disengage the QMA connectors, pull back firmly on the outer sleeve of the QMA plug away from the
jack connector (refer to Figure 3-2). This will disengage the locking mechanism that secures the plug
connector to the jack connector. Pulling on or disengaging the QMA connectors in any other way is not
recommended and may cause damage to both the connectors and coaxial cable.
Side-loading of the QMA connectors should be avoided during both the insertion and
removal of the connectors. It is recommended service loops with adequate length of
coaxial cable be used to insure that side-loading on the connectors is minimized once the
cable is securely fastened in the aircraft. Excessive side-loading may result in damage or
premature failure of the QMA connectors.
Page 3-4
Revision 4TP
CAUTION
Disengage
Figure 3-2. Disengaging QMA Connectors
CAUTION
Outer Sleeve
GTS 8XX/GPA 65 Installation Manual
190-00587-00