Table of Contents
Advertisement
Setting Cruise Control
{
CAUTION:
If you leave your cruise control on when you
are not using cruise, you might hit a button
and go into cruise when you do not want to.
You could be startled and even lose control.
Keep the cruise control switch off until you
want to use cruise control.
1. Press the cruise control on/off button to turn cruise
control on. An indicator light on the button will
come on to show that the cruise control is on.
2. Accelerate to the speed you want.
3. Press the set button and release it. This will set
the cruise control.
4. Remove your foot from the accelerator pedal.
3-18
Resuming a Set Speed
Suppose you set your cruise control at a desired
speed and then you apply the brake. This shuts off
the cruise control. But you don't need to reset it.
Once the vehicle is traveling approximately
25 mph (40 km/h) or more, you can press the plus
(resume/accelerate) button to return to your desired
preset speed. The cruise control light will be
displayed again.
The vehicle will return to and stay at your preset speed.
If you press and hold the plus (resume/accelerate)
button, the vehicle speed will increase until you
release the button or apply the brake. Unless you
want to go faster, do not press and hold the plus
(resume/accelerate) button.
This light on the instrument
panel cluster will come on
when cruise control is
on. It will go out when
cruise control is turned off.
Advertisement
Chapters
Table of Contents
