Windshield Wipers - Cadillac 2004 XLR Owner's Manual

Flash-to-Pass
This feature lets you use the high-beam headlamps to
signal the driver in front of you that you want to
pass. Pull and hold the turn signal lever toward you to
use. When you do, the following will occur:
•
If the low-beam headlamps are on, the high-beam
headlamps will turn on. They'll stay on as long as
you hold the lever there. Release the lever to
turn them off.
•
If the headlamps are on high-beam, they will switch
to low-beam. To return to high beam, push the
lever away from you.

Windshield Wipers

Use the lever located on the right side of the steering
column to operate the windshield wipers.
1
(High Speed): Move the lever to this position for
steady wiping at high speed.
6
(Low Speed): Move the lever to this position for
steady wiping at low speed.
&
(Delay): Move the lever to this position to activate
the Rainsense™ function. Adjustments in this region
change the sensitivity of the Rainsense™ system.
9
(Off): Move the lever to this position to turn off the
windshield wipers.
8
(Mist): Move the lever all the way down to mist and
release for a single wiping cycle. The windshield
wipers will stop after one wipe. If you want more wipes,
hold the band on mist longer.
Heavy snow or ice can overload the wipers. If this
occurs, a circuit breaker will stop the wipers until the
motor cools. So, be sure to clear any ice and snow from
the windshield wiper blades before using them. If the
wiper blades are frozen to the windshield, carefully
loosen them or warm the windshield before turning the
wipers on. If your blades do become worn or
damaged, get new blades or blade inserts.
3-9