Cadillac 2003 Escalade Owner's Manual page 25

Unfolding the Seatback
1. To return the seatback
to an upright position,
pull up
on
the
release lever labeled 1
and then pull up on
the seatback until
it locks into the upright
position.
2. Push and pull on the seatback to check that it is
locked into place.
Tilting the Full Bench Seat
I
cause i..,Jry to the persor. A i n g there. Always
press rearward on the seatback to be sure it is
locked.
-7
1. Fold the seatbacks forward using the instructions
listed previously.
2. Unlatch the seat from
the floor by pulling up
on the lever labeled 2
located on the rear
of the seat.
If the seatback isn't locked, it could move
forward in a sudden stop or crash. That could
CAUTION: (Continued)
1-18
3. Lift the rear of the seat up from the floor and push it
forward. You will not be able to unlatch the seat
from the floor unless the seatback is folded down