Windshield Wipers - Cadillac 2000 Catera Owner's Manual

Headlamp High/Low Beam
With the Twilight Sentinel
dial turned to the headlamp position, push the turn
signal lever on the driver's side of the steering wheel
away from you to turn on the high
Pull the lever back to the original position to return
-
to low beam headlamps. For more information,
see "Headlamps" in the Index.
Flash-To-Pass
This feature uses the high
driver in front of you that you want to pass. This feature
will work with either the headlamps on or off.
To use, pull the turn signal lever toward you and release.
2-36
R
on or with the lamp control
-
beam headlamps.
This light on the
instrument panel cluster
will be on, indicating
-
high beam usage.
-
beam headlamps to signal the

Windshield Wipers

WIPER: Move the lever on the passenger's side of the
steering wheel up and down to control the wipers.
MIST: Tap the lever up and then release it for a single
wipe cycle. For more cycles, pull and hold the lever.
= (HIGH): Move the lever all the way up for a fast
wiper speed.
-
(LOW): The third position up controls the low
wiper speed.
--
(DELAY): This position is for a controlled delay
setting. Turn the control dial on the lever to increase or
decrease the delay between wipe cycles.
o (OFF): This position turns off the wipers.