Cadillac 2000 Catera Owner's Manual page 100

Turn Signal/Multifunction Lever
Turn and Lane Change Signals
To signal a turn, move the turn signal/multifunction
lever all the way up or down. The lever returns
automatically when the turn is complete.
Raise or lower the lever until the arrow starts to flash to
signal a lane change. Hold it there until the lane change
is complete. The lever returns when it is released.
Arrows that flash rapidly when signaling for a turn or
lane change may be caused by a burned
signal bulb. (This does not occur with a burned
rear bulb). Other drivers won't see the turn signal.
-
Replace burned out bulbs to help avoid possible
accidents. Check the fuse (see "Fuses and Circuit
Breakers" in the Index) and for burned
if the arrow fails to work when signaling a turn.
This arrow on the
instrument panel cluster
will flash in the direction
of the turn or lane change.
-
out front
-
out
-
out bulbs
2-35