Ricoh Pro C9200 Operating Instructions Manual page 137

Setting Item
11: Across Feed
12: With Feed
[Trapezoidal Distortion Result: Side 1]/[Trapezoidal Distortion Result: Side 2]
Display the perpendicularity (image magnification of trailing edge with across feed direction) of side
1/2 when performing auto adjust image position.
Adjust the proportion with "+" or "-", the present length at the trailing edge being counted as 100%.
Setting Item
13: Operator Side/14: Opposite Side of
Operator/15: Operator Side/16:
Opposite Side of Operator
[Trapezoidal Distortion Result: Adjust Front & Back]
Display the trapezoidal deviation to align the image of side 2 to the image of side 1 when performing
auto adjust image position. The value set here is added to the value of [Trapezoidal Distortion Result:
Side 2].
Adjust the proportion of the trailing edge of Side 2 length with "+" or "-", Side 1 length being counted as
100%.
Max. Value Min. Value
0.500 -0.500
Max. Value Min. Value
0.250 -0.250
[Machine: Image Position]
Step Unit
0.001 %
0.025
Step Unit
0.001 %
135