If You Cannot Connect To The Internet; Adjusting The Server Display Settings - Sony KDL-46HX820 Setup Guide (Operating Instructions) Setup Manual

Type 4: Wired network setup
Enter the respective alphanumeric values
for your router if necessary. The items that
need to be set (e.g. IP Address, Subnet
Mask, DHCP) may differ depending on the
Internet service provider or router. For
details, refer to the instruction manuals
provided by your Internet service provider,
or those supplied with the router.
1
Press HOME, then select
Network > Network Setup.
2
Select Wired Setup.
3
Select Auto to set the IP Address
and proxy server automatically, or
Custom to set them manually.
4
Follow the instructions on the setup
screen.
Viewing the network status
You can confirm your network status.
1
Press HOME, then select
Network > Network Setup.
2
Select View Network Status.
If you cannot connect to
the Internet
Use the diagnostic to check possible causes
for network connection failures, and
settings.
1
Press HOME, then select
Network > Network Setup.
2
Select View Network Status.
34
3
Select Check Connection.
This may take several minutes. You
cannot cancel the diagnostic after
selecting Check Connection.
Adjusting the server
display settings
You can select home network servers to be
displayed on the Home Menu. Up to 10
>
servers can be displayed in the Home Menu
automatically.
1
Press HOME, then select
Network > Home Network
Setup.
2
Select Show/Hide Media
Servers.
3
Select the server you want to display
on the Home Menu, and adjust the
settings.
If you cannot connect to your
home network
>
The TV detects if the server is being
correctly recognized when you cannot
connect it to your home network. If the
diagnostic results indicate a failure, check
possible causes, and network connections
and settings.
1
Press HOME, then select
Network > Home Network
Setup.
2
Select Media Server
Troubleshooting.
>
The server diagnostic starts. When the
server diagnostic is complete, the
diagnostic result list appears.
>
>