Sony KDL-46HX820 Setup Guide (Operating Instructions) Setup Manual page 33

Type 1: Secured network with
Wi-Fi Protected Setup (WPS)
The WPS standard makes security of a
wireless home network as straightforward
as pressing the WPS button on the wireless
LAN router. Before setting up a wireless
LAN, check the location of the WPS button
on the router and verify how to use it.
For security purpose, WPS (PIN) provides
a PIN code for your router. PIN code is
renewed every time you select WPS (PIN).
1
Press HOME, then select
Network > Network Setup.
2
Select Wireless Setup.
3
Select WPS (Push Button) for
Push Button method or WPS (PIN)
for PIN method.
~
• Button name of the WPS may differ
depending on the router (e.g. AOSS
button).
4
Follow the instructions on the setup
screen.
Type 2: Secured network
without Wi-Fi Protected Setup
(WPS)
To set up a wireless LAN, SSID (wireless
network name) and security key (WEP or
WPA key) will be required. If you do not
know them, consult the instruction manual
of your router.
1
Press HOME, then select
Network > Network Setup.
2
Select Wireless Setup.
3
Select Scan, then select a network
from the list of scanned wireless
networks.
4
Follow the instructions on the setup
screen.
~
• If you use WPS for network setup, the security
settings of the wireless LAN router activate,
and any equipment previously connected to the
wireless LAN in a non-secure status will be
disconnected from the network.
In this case, activate the security settings of the
disconnected equipment and then reconnect.
>
Or, you can deactivate the security settings of
the wireless LAN router, and then connect the
equipment to a TV in a non-secure status.
Type 3: Unsecured network
with any type of wireless LAN
router
To set up a wireless LAN, SSID (wireless
network name) will be required.
1
Press HOME, then select
Network > Network Setup.
2
Select Wireless Setup.
3
Select Scan, then select a network
from the list of scanned wireless
networks.
4
Follow the instructions on the setup
screen.
~
• Security key (WEP or WPA key) will not be
required because you do not need to select any
security method in this procedure.
>
>
33
(Continued)