Table of Contents
Advertisement
Available languages
Available languages
2.8 M.2_SSD (NGFF) Module Installation Guide (M2_1)
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2
Socket (M2_1) supports M Key type 2260/2280 M.2 PCI Express module up to Gen4x4 (64
Gb/s) (Only supported with 11
Installing the M.2_SSD (NGFF) Module
1
B
A
No.
Nut Location
PCB Length
Module Type
28
th
Gen Intel® Core
1
2
2
1
1
2
A
B
6cm
8cm
Type2260
Type 2280
TM
Processors).
Step 1
Prepare a M.2_SSD (NGFF) module
and the screw.
Step 2
Before installing a M.2 (NGFF)
SSD module, please loosen
the screws to remove the M.2
heatsink.
*Please remove the protective
films on the bottom side of the
M.2 heatsink before you install
a M.2 SSD module.
Step 3
Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
Advertisement
Table of Contents
