ASROCK H570 Steel Legend Manual page 29

SPI TPM Header
(13-pin SPI_TPM_J1)
(see p.1, No. 21)
Thunderbolt AIC
Connector
(5-pin TB1)
(see p.1, No. 28)
RGB LED Headers
(4-pin RGB_LED1)
(see p.1, No. 25)
(4-pin RGB_LED2)
(see p.1, No. 7)
Addressable LED Headers
(3-pin ADDR_LED1)
(see p.1, No. 26)
(3-pin ADDR_LED2)
(see p.1, No. 8)
SPI_DQ3
+3.3V
TPM_Present
CLK
SPI_MOSI
RST#
TPM_PIRQ
1
SPI_TPM_CS#
GND
RSMRST#
SPI_MISO
SPI_CS0
SPI_DQ2
1
1
12V G R B
B
R
G
12V
1
1
GND
DO_ADDR
VOUT
H570 Steel Legend
This connector supports SPI
Trusted Platform Module (TPM)
system, which can securely
store keys, digital certificates,
passwords, and data. A TPM
system also helps enhance
network security, protects digital
identities, and ensures platform
integrity.
Please connect a
Thunderbolt™ add-in card
(AIC) to this connector
via the GPIO cable.
*Please install the Thunderbolt™
AIC card to PCIE3 (default slot).
RGB headers are used to connect
RGB LED extension cables which
allow users to choose from
various LED lighting effects.
Caution: Never install the
RGB LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 39 for further
instructions on this header.
These headers are used to connect
Addressable LED extension cables
which allow users to choose from
various LED lighting
effects.
Caution: Never install the Ad-
dressable LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 40 for
further instructions on this
header.
25