Buick 2005 LeSabre Owner's Manual page 138

Manual Operation
Pressing the FAN or AIR FLOW buttons cancels
automatic operation and places the system in
manual mode. Press the AUTO button to return to
automatic operation.
TEMP (Temperature): To manually adjust the
temperature inside the vehicle, push the TEMP arrow.
Push the TEMP up arrow for warmer temperature
settings and the TEMP down arrow for cooler
temperature settings. The setting will be shown on the
display. The display will return to the outside
temperature after a few seconds.
9
FAN: Pressing the FAN button will display and hold
the current fan speed while in manual mode. If you
want the fan to run at a lower speed, push the down
arrow on the FAN button. If you want to increase the fan
speed, push the up arrow on the FAN button.
AIR FLOW: Pressing the AIR FLOW button will display
and hold the current setting while in manual mode.
Use the up and down arrows on the AIR FLOW button
to cycle through the available modes.
•
WINDSHIELD-FLOOR: This mode directs most of
the airflow to the windshield with some airflow to
the outboard outlets (for the side windows) and the
floor outlets.
3-28
•
MID: This mode directs airflow through the
instrument panel outlets.
•
MID-FLOOR: This mode directs airflow through
both the floor and the instrument panel outlets.
There is also a small amount of air directed to the
windshield and the outboard outlets (for the
side windows).
•
FLOOR: This mode directs most of the airflow to
the floor outlets with some directed to the outboard
outlets (for the side windows) and the windshield.
OFF: Press the OFF button once to turn off the
passenger climate control, if it has been activated.
Pressing the OFF button a second time will turn off the
main system. The outside temperature will be shown
on the display when the system is off.
VENT (Flow-Through Ventilation): Pressing the VENT
button allows outside air to flow through your vehicle
without the air conditioning compressor working. To turn
VENT off, press the VENT button again.
Selecting the VENT and AUTO buttons at the same
time allows the system to control the airflow
automatically without using the air conditioning
compressor or the recirculation mode.