How To Send Configuration A Mains Powered Dau - Honeywell GENT COMPACT-MAINS-DAU Commissioning Instructions

How to Send Configuration a Mains Powered DAU

Usually the entire system configuration is sent from the Commissioning tool to all the Mains Powered DAUs via Vigilon Compact VA
panel.
However if you want to send the configuration to an individual Mains Powered DAU in a Vigilon Compact VA system it is possible to
do this using the following procedures. First ensure the ACS Config link on MCB is configured to ENABLE.
Configure link on MCB
ACS CONFIG
DISABLE
ENABLE
P6
The link ACS CONFIG
be in the ENABLE position before
any Mains Powered DAU
configuration is received from the
Commissioning tool.
Upon successful transfer of configuration to a Mains Powered DAU set the ACS Config link on the MCB to DISABLE position.
www.acornfiresecurity.com
Menu option
Comms
1a
Send Mains DAU Config...
1b
P6 must
www.acornfiresecurity.com
3
4
Mains Powered DAU
27