Table of Contents
Advertisement
■ Channel selection
There are several types of channel selections. Methods may
differ, depending on the presetting. Consult your dealer for
details.
To select the desired operating channel:
➥ Rotate [ROTARY SELECTOR].
➥ Push one of [MR-CH 1] to [MR-CH 4].
➥ Push [Prio A], [Prio B], [Prio A (Rewrite)] or [Prio B
(Rewrite)].
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this scan type. When
turning ON the power, the transceiver automatically starts
scanning. Scanning stops when a signal is received.
BASIC OPERATION
■ Receiving and transmitting
CAUTION:
Attach an antenna before transmitting.
Transmitting without an antenna may damage the trans-
ceiver.
Receiving:
Rotate
[VOL] to turn ON the power.
q
[ROTARY SELECTOR], or push one of the memo-
Rotate
w
ry channel keys, [MR-CH1] to [MR-CH4], to select a chan-
nel.
e When receiving a call, adjust the audio output level to a
comfortable listening level.
Transmitting:
Wait until the channel is clear to avoid interference.
While holding down
[PTT], speak at a normal voice level.
q
[PTT] to receive.
Release
w
IMPORTANT: To maximize the readability of your signal:
1. After pushing [PTT], pause briefly before you start
speaking.
2. Hold the microphone 5 to 10 cm (2 to 4 inches) from
your mouth, then speak at a normal voice level.
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
6
Advertisement
Table of Contents
