IBM Proventia Management SiteProtector SP2001 Quick Start Manual page 2

Before you begin
This document provides connection and initial configuration information for the
IBM Proventia Management SiteProtector SP2001.
The steps you perform here will allow you remote network access to the appliance
so that you can perform more advanced configuration tasks. You will find more
advanced configuration information in the IBM Proventia Management SiteProtector
SP2001 Hardware Configuration Guide, available on the Web at http://www.iss.net/
support/documentation.
Gather materials
Gather network information
Use this table to record important network information you need to configure the
appliance:
Gather Product Key
Use this space to record the Product Key of the appliance's operating system.
This Product Key can be found on the Certificate of Authenticity that is affixed to
the appliance. You will need it in the event of a system restore.
Product Key _________________________________________
Connect the Appliance
Procedure
1. Connect both power cords to the appliance to prevent warning signals from
2. Connect the network to the management interface using the supplied Ethernet
3. Turn on the appliance. The power button is located on the back of the
4. When the LCD display reads "IBM ISS Proventia SP2001," proceed to Initial
2
SiteProtector SP2001: Quick Start Guide
Materials
U
IBM Proventia Management SiteProtector SP2001
h
Ethernet cable (included with appliance)
h
2 power cords (included with appliance)
h
Settings Your Settings
IP Address __________ . __________ . __________ . __________
Subnet Mask __________ . __________ . __________ . __________
Default Gateway __________ . __________ . __________ . __________
DNS Server __________ . __________ . __________ . __________
Hostname ______________________________________________
sounding.
cable.
appliance.
Configuration.