IBM XGS 7100 Replacement Instructions

Power Supply Replacement Instructions
The following table lists the appliance models that are supported by the instructions in this document:
Product
IBM Security Network Protection
IBM Security SiteProtector
Note: The illustrations in this document might differ slightly from your appliance model.
Important: Before you proceed with these instructions, review the IBM Systems Safety Notices provided in
the IBM Media Terms and Conditions CD that is included with your appliance model.
CAUTION:
The power control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all current from the device, ensure that all power cords are disconnected from the power
source.
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
CAUTION:
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.
Model
XGS 7100
™
System SP 3001
®
IBM Part Number
97Y1013
46N5744