Buick 1994 Century Owner's Manual page 98

To Resume a Set Speed
Suppose you set your Cruise Control at
a
desired speed
and then you apply the brake. This, of course, shuts off
the Cruise Control. But you don't need to reset it.
Once you're going
about 25 mph (40 h / h )
or more, you can move
the Cruise Control
switch from "ON"
to "R/A"
(Resume/Accelerate)
for about half a second.
To Increase Speed While Using Cruise
Control
There are two ways to go to a higher speed. Here's the first:
1 . Use the accelerator pedal to get to the higher speed.
2. Push the SET button at
the end of the lever,
then release the button
and the accelerator
pedal. You'll now cruise
at the higher speed.
You'll go right back up to your chosen speed and stay there.
<
Remember, if you hold the switch at "R/A" longer than
half
a
second, the vehicle will keep going faster until
you release the switch or apply the brake. You could be
startled and even lose control. So unless you want to go
faster, don't hold the switch at "R/A."
Here's the second way to
go to a higher speed:
1. Move the Cruise switch
from "ON" to "R/A."
Hold it there until you
get up to the speed you
want, and then release
the switch.
96