Table of Contents
Advertisement
4. Then fill the coolant
recovery tank to
e
"FULL COLD."
5.
Put the cap back on the
coolant recovery tank,
but leave the radiator
pressure cap off.
7. By this time the coolant ,level inside the radiator
filler neck may be lower.
If
the level is lower, add
more of the proper mix through the filler neck until
the level .reaches the base
of the filler neck.
6. Start the engine and let
it run until you can feel
the upper radiator hose
getting hot. Watch out
for the engine fan.
8. Then replace the
pressure cap. Be
sure the arrows on
the pressure cap
line up like this.
223
Advertisement
Chapters
Table of Contents
