Post Behavior - Dell Latitude 7220EX Service Manual

Option Description
Enable Advanced Battery Charge Mode- is disabled
Battery#1 Charge Allows you to select the charging mode for the battery. The options are:
Configuration
● Adaptive—enabled by default
● Standard—Fully charges your battery at a standard rate.
● ExpressCharge—The battery charges over a shorter time using Dell's fast charging technology.
● Primarily AC use
● Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
Battery#2 Allows you to select the charging mode for the battery. The options are:
Charge
● Adaptive—enabled by default
Configuration
● Standard—Fully charges your battery at a standard rate.
● ExpressCharge—The battery charges over a shorter time using Dell's fast charging technology.
● Primarily AC use
● Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
Dock Battery Allows you to select the charging mode for the battery. The options are:
Charger Mode
● Standard—enabled by default
● ExpressCharge—The battery charges over a shorter time using Dell's fast charging technology.
Type-C This allows you to set the maximum power that can be drawn from the Type-C connector. The options
Connector Power are:
● 7.5 Watts—enabled by default
● 15 Watts
Power Usage Allows you to choose the system power usage mode. The options are:
Mode
● Power Saver
● Balanced-enabled by default
● Performance
● High Performance

POST behavior

Option Description
Adapter Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
Warnings adapters.
Default setting: Enable Adapter Warnings
USB-C Warnings Allows you to enable the system displays warning messages for USB-C devices.
Enable Dock Warning Messages. This option is enabled by default.
Keypad Allows you to select one of the two methods to enable the keypad that is embedded in the internal
(Embedded) keyboard.
● Fn Key Only—enabled by default
● By Numlock
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
NOTE: Setting a higher power value for the Type-C connector may cause the system to throttle
sooner, if the total system power budget is exceeded.
System setup 77