Steps
1. Place the battery cover assembly from the tablet.
2. Slide the battery cover assembly into the chassis.
3. Tighten the two (M4x11.5) captive screws to secure the battery cover assembly to the chassis.
4. Place the handle of the two (M4x11.5) captive screws to its initial position.
Next steps
1. Follow the procedure in
System cover
Removing the system cover
Prerequisites
1. Follow the procedure in
2. Remove the
batteries cover
3. Remove the stylus.
About this task
The figure indicates the location of the system cover and provides a visual representation of the removal procedure.
after working inside the
tablet.
before working inside the
assembly.
tablet.
Field service information
21